Tag Archives: fire starting

  • 5 Ways to Start a Fire with Water

    |10 COMMENT(S)

    5 Ways to Start a Fire with Water

    A crucial skill to have in practically any emergency situation is knowing how to build a fire. Whether you get lost overnight on a ski trip or your car runs out of gas as you pack up to leave your campsite, knowing how to build a fire and stay warm could save your life.

    So what’s the best way to build a fire? “Building” a fire typically comes in three stages: gather the materials, lay the fire, and then start it. Check out our Insight Article to learn “How to Build a Fire” using these three stages.

    However, in an emergency situation, there’s one other item that could actually help you start a fire that many overlook—water. It’s true. Grant Thompson, from thekingofrandom.com, shows five ways you can start a fire using water. Check it out:

    There you have it: five ways water can start a fire. Four of Thompson’s five fire starting methods show you how to use water as a magnifying glass to spark a fire, letting the power of the sun do all the work (or at least a lot of it!). But e But B ven if there’s cloud cover, you aren’t out of luck. With just a few supplies you can still ignite a fire in seconds.

    If you plan to use water to help you start a fire in an emergency, make sure to add the following supplies to your emergency gear so you are completely prepared.

    Method 5:

    • A light bulb. Make sure your bulb has been rinsed and cleaned according to Thompson’s directions. Cushion the bulb with fabric, grocery sacks, or other forms of padding to keep it from breaking and place it in a small container before you put it in your emergency supplies.
    • A balloon to cap off the end of the light bulb after you’ve filled it with water

    Method 4

    • Plastic wrap
    • A bowl

    Method 3

    • Plastic wrap
    • A picture frame

    *For this method, make sure you have a way to securely attach the plastic wrap to the frame and to heat water.

    Method 2

    • A juice bottle (that looks like a bubble) filled with water

    Method 1

    • Toilet paper
    • Toilet paper roll
    • Small chunks of sodium
    • Jar lid

     

    Caution! Playing with fires is dangerous so make sure to have proper safety gear (a fire extinguisher, goggles, and leather gloves) with you when practicing these new ways to start a fire. Also, make sure to light fires in a cleared area away from flammable objects or dry grass.

    These are some fun, unique methods you can use to start a fire, but don’t forget about the traditional methods as well. Adding items such as the Sparkie, the P-25 Strike Master or FiredUp! firestarters to your emergency supplies are reliable ways to get a roaring fire and warmth fast. (Or, taking a hint from Thompson, how about a magnifying glass?)

     

     

    Sources:

    http://www.youtube.com/watch?v=HCyHC7lnMyQ

    Posted In: Uncategorized Tagged With: fire starting, fire, emergency preparedness, skills

  • How to Build a Fire

    |4 COMMENT(S)

     How to build and Start a Fire

    Like so many ancestral skills, the ability to start and maintain a fire has been nearly eliminated by modern technology. Electric heaters, ovens and stoves, and hot water heaters all do the jobs once performed by fire. So, unless you’re a Boy Scout merit badge counselor, you could probably use a refresher course.

    Whether you’re planning a marshmallow roast or trying to stay alive in the woods, the process is fairly universal. In fact, the biggest variable is probably going to be whether or not you’ve got matches on hand. Assuming either circumstance (and a couple others, just for good measure), here are the basic steps to building an effective fire.

     

    Preparing to Build a Fire

    Before you can even think about that roaring blaze, gather all the materials you’ll need.

    1. Bed – If your main objective is the perfect s’more, chances are fair that you’re operating in a dedicated fire container—a backyard grill or campsite fire pit. If you’re roughing it, however, you’ll need to clear a safe space for your fire. Always build on bare ground—never grass!—and give yourself six feet of clearance from trees or other flammable vegetation. Dirt, rocks, or sand can all be used to line a fire pit.

    2. Tinder – Think of fire in three stages, starting with the smallest, finest fuel and ending with the bulkiest. The first is tinder. Tinder should be the most easily consumed, as it’s the material that’s going to help get the fire started. Dry leaves or grass, bark, thin twigs, paper, or wood shavings all work well, assuming conditions are nice and dry. Of course, assumptions like that tend to be what get us into trouble in the first place. You can’t always be sure that the weather will work in your favor or that you’ll be able to find dry material to use as tinder for a fire. Store dryer lint, utility flame, or FiredUp! with camping gear or emergency packs to make sure you have something to work as dry tinder if you can’t find any from natural materials.

    3. Kindling – Step two is kindling. Your tinder will burn up before the fuel can catch fire; kindling is the bridge between the two that extends the life of your flame. Kindling should be thicker than tinder, but much smaller than a log (thumb’s breadth is a conventional maximum). And even if the day is dry, a thicker stick may be wet or green inside. Good kindling snaps easily when broken.

     How to build a fire with kindling

    4. Fuel – This is the meat of your fire and what will keep it burning long after the tinder and the kindling have turned to ash. Remember, the bigger it is, the longer it will take to light. Small to medium-sized logs or branches are ideal.

     

    Laying a Fire

    “Laying” a fire refers to the arrangement of the materials. Variations may be better for specific uses (at camp, I was taught to make a log cabin for foil dinners and a star for tripod cooking), but if the idea is just to get warm, any of the following arrangements work.

    Teepee – Just like it sounds, a teepee fire is cone-shaped, with tinder in the center, then kindling. Position your fuel so that each log or branch stands on one of its ends, leaning so that they touch at the center, creating a teepee over the tinder and kindling. Be sure to leave a space to light the tinder and let air in to keep the fire burning.

    Building a Teepee Fire

    Log cabin – A log cabin fire starts like a teepee, with tinder in the center, surrounded by a cone of kindling. Two larger pieces of fuel, parallel to each other, flank the teepee. Lay medium-sized pieces crosswise across the larger two, then smaller pieces crosswise on those, and so on.

    Star – Start with a teepee once again, but instead of building a structure around it with fuel, arrange your logs in a radiating pattern around the center. This is the easiest formation, allowing you to simply push fuel in toward the center or pull it out to control the size and duration of the fire.

     

    Starting a Fire

    Alright, this is where it gets tricky. Though there are lots of ways to start a fire, some are unequivocally easier than others. With each of these, the idea is to ignite the tinder, then blow softly on the flame to increase the burn. Let’s look at them in order from least to most difficult.

    Lighter – This one’s pretty much a sure bet. Just be careful about long-term storage (lighters can leak), and keep fingers out of the way when lighting.

    Matches – Waterproofed strike-anywhere matches are a favorite for camping and emergency packs. (These stormproof matches are the best ones we’ve seen.)

    Flint and steel – This old standard works in a pinch, and technically, any hard rock and metal striker can work, but your better bet is to carry the right materials in preparation. For flint and steel to work best, you may need something even finer than your tinder to catch the spark (dryer lint, char cloth). Make a nest of the spark catching material and surround that with tinder. Then strike the flint to the steel until it sparks.

    Lens – In the absence of any of the above materials, a magnifying glass, eyeglasses, binoculars, or the bottom of a glass bottle can be adapted as a fire starter. It’s as simple as focusing the beam of light on your pile of tinder or spark catcher and waiting till it smolders. The catch: it only works on a sunny day. If it’s after dark or in inclement (or even just overcast) weather, you’re out of luck.

    Friction –Yes, you can make a fire with friction. No, it will not be easy or quick. The principle at work has to do with the heat generated by rubbing wood on wood. Eventually, you’ll create a hot ember, which you’ll (every so carefully!) transfer to your bed of tinder, igniting a spark. But whether you’re using a hand drill or a bow, be prepared to work at it.

     

    Still not feeling confident in your fire starting skills? Check out a couple good tutorials at the links below, and then go outside and practice, practice, practice. Just, you know, keep the garden hose handy.

    http://www.wikihow.com/Build-a-Fire
    http://www.artofmanliness.com/2008/09/04/how-to-build-a-roaring-campfire/
    http://www.lds.org/languages/youthmaterials/YWCampManual_000_2006.pdf

    Posted In: Insight, Skills, Uncategorized Tagged With: fire starting, survival skills

Please wait...